-
Totally 10 drive bays: 3 x 5.25"
ODD and 7 x 3.5" HDD bay (if MB is 12"x9.6" ATX MB
installed)
-
The bottom 5.25" ODD might be
conflicted by the 12" x 13" EATX board
-
Drive
bay equipped with anti-vibration function, extend storage
appliance life
-
Equipped with front door by a security
lock & with removable dust air filter function
-
Screwless hand-free top cover design
(screws can also be used & fixed)
-
Standard with one brand new 120mmx25mm
intake fan at front (fan part# D12SM-12C)
-
with one 120mm x 25mm intake fan at front
bezel
-
Equipped with 6
short-medium-long hold-down card clamps upward
& downward allowed
-
Build-in two
ABS screwless 80mmx25mm fan
brackets at
rear panel (fans
are option)
-
MB: eATX EEB3.61(12"×13"),
ATX(12"x9.6"), MicroATX(9.6"x9.6"), Mini-ITX(6.7"x6.7")
-
8cm
or 12cm~14cm fan version standard PS2 PSU compatible
(depth at 140~260mm)
-
Support SureStar R4S series 400W~500W
PS2 Mini Redundant PS (depth 174mm)
-
Support Enhance ENR0500 400W~600W PS2
Mini Redundant PS (depth 185mm)
-
Support Zippy MRT & MRW series
300W~600W PS2 Mini Redundant PS (depth 185mm)
-
Support Sysgration Etasis EFRP-2402/2462/S2502
400W~500W PS2 Mini RPS (depth 190mm)
-
Support SureStar R4B series 600W~800W
PS2 Mini Redundant PS (depth 199mm)
-
Support Zippy MRG series 500W~800W
PS2 Mini Redundant PS (depth 200mm)
-
Support 7 full height expansion cards (max. 240mm deep if HDD installed
at front)
-
Support 7 full height expansion cards (max. 320mm deep if no HDD
installed at front)
-
Standard paint: scratch-resistant Black
textured at front
-
Chassis
dimension: 19" x 4U x 450mm (17.71" deep)
-
Accessory
pack:
MB stand-off x12, #6 round screw x40, , M3 truss screw x8, key x2