Aluminum 3x5.25" to 12x2.5" SAS/SATA Hot-Swap Cage Backplane RW-1225

PRODUCT TECHNICAL SPECIFICATIONS

Three 5.25" space converted to twelve 2.5" hotswap mobile rack module (additional RAID Controller Card needed)
Support 12 x 2.5" SATA2/SATA3 (SAS6G) HDD/SSD, fit 7mm, 9.5mm, 12.5mm, 14.5mm, 15mm height of HDD
Entire mechanism by heat conductive aluminum extrusion heatsink with glossy brushed finish on the surface
The newest PLinkUSA / RackBuy creative RailWay hotswap tray design with smooth travel while sliding in and out
Patented anti-vibration spring design, HDD can be mounted from two sides or bottom of hotswap HDD tray
12 HDD LED: each LED with 2 colors, blue for power, purple for access
Cooling system with one 80mm x 15mm exhaust fan at rear side of HDD cage
Front interface (LED): fast red flash as overheat, slow red flash as fan malfunction
Rear interface (1): 12 x SATA 7pin data transfer port, 3 x SATA 15pin psu input port, HDD access signal on/off switch
Rear interface (2): 1 x 2.54pin temperature overheat connector and 1 x 2.54pin fan malfunction connector
Rear interface (3): 12 x 2.54pin HDD signal connector
Rear interface (4): high speed fan or low speed fan adjustable switch
Accessory Pack: key x 2pcs, M3 flat head nickel screw x 52pcs, M3 round head nickel screw x 8pcs
Product dimension: 165(L) x 146(W) x 127(H)mm
Package: N.W. 1.55 KGM, G.W. 1.72 KGM, CUFT 0.267 (255mm x 165mm x 180mm, single box packed)