Athena Power

 1U 350W Dual Fan Power Supply

U1ATX35A

PRODUCT TECHNICAL SPECIFICATIONS AC Input Voltage: 90 to 132 or 180 to 264 Auto selectable 50 to 60 Hz. DC Output: 350W maximum Noise Test – Noise bandwidth is from DC to 20 MHz. Ripple frequencies greater than 1MHz shall be attenuated by the measurement System. Add 0.1uF/10uF capacitor at output connector terminals for ripple and noise measurements The combined total power from 5V & 3.3V shall not exceed 160W. The combined total power from +5V and +12V & +3.3V shall not exceed 325W. +5V SB DC Output 2A. PS-ON Remote On/Off Control: When PS-ON is pulled to TTL Low, the DC output is to be enabled. When PS-OFF is pulled to TTL high, the DC output is to be disabled. PW-OK PW-OK is power good signal and should be asserted high by the power supply to indicate that +5VDC and +3.3VDC output are above the under voltage thresholds of the power supply TTL. compatible signal out with 100ms to 500ms.

	Output-1 Output-2 Output-3 Output-4 Output-5 Voltage: +5V DC +12V DC -5V DC -12V DC +3.3V DC Maximum Load: 35A 16A 0.5A 0.8A 20A Minimum Load: 3A 2A 0.1A 0.1A 0.3A Ripple: 50mv 120mv 50mv 120mv 50mv Ripple/Noise: 100mv 150mv 100mv 240mv 50mv Line Regulation: ±1 ±1 ±1 ±1 ±1 Output Regulation: ±5 ±5 ±10 ±10 ±5 Cross Regulation: ±5 ±5 ±10 ±10 ±5
Click thumbnails to view larger photos

Enjoy FREE S/H for most of our accessories !!!

Availability: Usually ships the same business day.

U1ATX35A$70.00
Shipping: Ground(+$10.00)Canada(+$20.00)Chassis Purchased Free